• VNC lag on local network after moving

    From Nightfox@VERT/DIGDIST to All on Tue Nov 17 10:31:15 2026
    I run my BBS on Linux with a simple GUI environment (Xfce), and I have a VNC server running on it using x11vnc. Sometimes I VNC to it to use it remotely from my main PC at home. Before moving, it was fast and responsive (and I have a gigabit network at home, with my PCs plugged in via ethernet). Recently I moved to a new place; my devices are still plugged in via ethernet here, and I've noticed that when I VNC to my BBS PC, there's now a lag. It displays quickly, but with any interaction I have with it (typing, mouse clicks, moving a window, etc.) there's a noticeable lag/delay. I haven't changed any configuration options. It seems odd to me. I've looked up what I could change as far as the VNC server - I found some options for it to enable some caching, which I think helped, though when I connected, the view was smaller and it wouldn't fill the whole client I was using.

    I've considered setting up a different remote desktop solution - I've heard VNC isn't the most optimized, and I suppose a different solution would be okay, as long as I can connect easily (I'd like to be able to connect from a Linux or Windows PC). It just seems odd that it was fine before moving and has the lag now.

    One difference is that in my last apartment, I had a long network cable going through the apartment connecting my fiber internet ONT (in the main bedroom closet) to my router in the 2nd bedroom, which I was using as an office; my new apartment has ethernet ports wired in each room, and I've connected my router and devices that way.

    Nightfox

    ---
    � Synchronet � Digital Distortion: digitaldistortionbbs.com
  • From nelgin@VERT/EOTLBBS to Nightfox on Tue Nov 17 13:35:56 2026
    On Tue, 17 Nov 2026 10:31:15 -0800
    "Nightfox" (VERT/DIGDIST) <VERT/DIGDIST![email protected]>
    wrote:

    I run my BBS on Linux with a simple GUI environment (Xfce), and I
    have a VNC server running on it using x11vnc. Sometimes I VNC to it
    to use it remotely from my main PC at home. Before moving, it was
    fast and responsive (and I have a gigabit network at home, with my
    PCs plugged in via ethernet). Recently I moved to a new place; my
    devices are still plugged in via ethernet here, and I've noticed that
    when I VNC to my BBS PC, there's now a lag. It displays quickly, but
    with any interaction I have with it (typing, mouse clicks, moving a
    window, etc.) there's a noticeable lag/delay. I haven't changed any configuration options. It seems odd to me. I've looked up what I
    could change as far as the VNC server - I found some options for it
    to enable some caching, which I think helped, though when I
    connected, the view was smaller and it wouldn't fill the whole client
    I was using.

    I've considered setting up a different remote desktop solution - I've
    heard VNC isn't the most optimized, and I suppose a different
    solution would be okay, as long as I can connect easily (I'd like to
    be able to connect from a Linux or Windows PC). It just seems odd
    that it was fine before moving and has the lag now.

    One difference is that in my last apartment, I had a long network
    cable going through the apartment connecting my fiber internet ONT
    (in the main bedroom closet) to my router in the 2nd bedroom, which I
    was using as an office; my new apartment has ethernet ports wired in
    each room, and I've connected my router and devices that way.

    I don't suppose you have a traceroute from your old place to your BBS
    that you can compare to your new place? It could be taking a less
    efficient route, but I think you're right about VNC not being the
    greatest. For me, I don't bother with a remote desktop for Linux, I
    just create an ssh tunnel to my BBS server and run vcxsrv on my Windows
    PC. Then I can run scfg, echocfg, qtmonitor or whatever directly on the
    Windows desktop without having to deal with everything in a windowed environment.

    A lot of people suggest nomachine but I've never tried it so I cannot
    really say.

    Also, with vnc I guess it depends on which "flavor" you're using. I
    think TightVNC is supposed to be faster but that could have changed
    much since I last used it.
    --
    End Of The Line BBS - Plano, TX
    telnet endofthelinebbs.com 23
    ---
    * Synchronet * End Of The Line BBS - endofthelinebbs.com
  • From Nightfox@VERT/DIGDIST to nelgin on Tue Nov 17 12:48:50 2026
    Re: Re: VNC lag on local network after moving
    By: nelgin to Nightfox on Tue Nov 17 2026 01:35 pm

    I don't suppose you have a traceroute from your old place to your BBS that you can compare to your new place? It could be taking a less efficient route, but I think you're right about VNC not being the greatest. For me,

    I don't have a traceroute. But that's something I could look into at my current place.

    I don't bother with a remote desktop for Linux, I just create an ssh tunnel to my BBS server and run vcxsrv on my Windows PC. Then I can run scfg, echocfg, qtmonitor or whatever directly on the Windows desktop without having to deal with everything in a windowed environment.

    I've done things like that too - Using SSH, I can run the configuration tools remotely as well as edit files remotely, etc.. Sometimes I have also run AI tools such as Claude and Cursor on a remote system and connect to it via SSH to do editing. But sometimes I find it handy to use a remote desktop connection with it, if I want to run a VM on the system or something (which I suppose could be done remotely too - but I think it can be easier to use the GUI VM tool and interact with it that way).

    A lot of people suggest nomachine but I've never tried it so I cannot really say.

    I'd heard about that, and I looked into it, though it looked like it requires you to sign up with an account with them; and they have a paid version for businesses and a free tier for personal use, but I'm a little leery of something that requires me to sign up with a user account with them.

    Also, with vnc I guess it depends on which "flavor" you're using. I think TightVNC is supposed to be faster but that could have changed much since I last used it.

    I should probably look into that too. I've used TightVNC elsewhere, but I don't think the VNC server I'm using is TightVNC.

    Nightfox

    ---
    � Synchronet � Digital Distortion: digitaldistortionbbs.com
  • From BiggieB@VERT/JJAMBBS to Nightfox on Tue Nov 17 16:35:06 2026
    I've noticed that when I VNC to my BBS PC, there's now a lag. It displays quickly, but with any interaction I have with it (typing, mouse clicks, moving a window, etc.) there's a noticeable lag/delay.

    Have you tried "Thin Cast Remote Desktop Client"? That's what I use to connect to my Linux machines over Remote Desktop. Works great and it's free.

    ---
    ■ Synchronet ■ Jersey Jam BBS - https://JerseyJam.com
  • From Accession@VERT/PHARCYDE to Nightfox on Tue Nov 17 17:18:44 2026
    Hey Nightfox!

    On Tue, Nov 17 2026 12:48:50 -0800, you wrote:

    I'd heard about that, and I looked into it, though it looked like it requires you to sign up with an account with them; and they have a paid version for businesses and a free tier for personal use, but I'm a little leery of something that requires me to sign up with a user account with them.

    You mean similar to your Plex pass? ;)

    I should probably look into that too. I've used TightVNC elsewhere, but I don't think the VNC server I'm using is TightVNC.

    Is it only in a GUI environment you're experiencing this? Or do you have these same issues when just simply connecting via ssh?

    Regards,
    Accession

    ... I don't suffer from insanity; I enjoy every minute of it.
    --- AmberEdit/linux 0.11.1
    * Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin) (723:1/1)
    � Synchronet � _thePharcyde telnet://bbs.pharcyde.org (Wisconsin)
  • From Nightfox@VERT/DIGDIST to BiggieB on Tue Nov 17 15:59:50 2026
    Re: VNC lag on local network after moving
    By: BiggieB to Nightfox on Tue Nov 17 2026 04:35 pm

    I've noticed that when I VNC to my BBS PC, there's now a lag. It displays quickly, but with any interaction I have with it (typing, mouse clicks, moving a window, etc.) there's a noticeable lag/delay.

    Have you tried "Thin Cast Remote Desktop Client"? That's what I use to connect to my Linux machines over Remote Desktop. Works great and it's free.

    Thanks - I'll plan on giving that a try.

    Nightfox

    ---
    � Synchronet � Digital Distortion: digitaldistortionbbs.com
  • From Nightfox@VERT/DIGDIST to Accession on Tue Nov 17 16:01:48 2026
    Re: Re: VNC lag on local network after moving
    By: Accession to Nightfox on Tue Nov 17 2026 05:18 pm

    I'd heard about that, and I looked into it, though it looked like it
    requires you to sign up with an account with them; and they have a paid
    version for businesses and a free tier for personal use, but I'm a little
    leery of something that requires me to sign up with a user account with
    them.

    You mean similar to your Plex pass? ;)

    Well for VNC (which is a common software tool and is normally free), you shouldn't have to sign up for an account with anyone.. I don't need anything premium for VNC.

    I should probably look into that too. I've used TightVNC elsewhere, but I
    don't think the VNC server I'm using is TightVNC.

    Is it only in a GUI environment you're experiencing this? Or do you have these same issues when just simply connecting via ssh?

    Yes, it's just the GUI environment doing this. If I just connect with SSH, I don't have any problems.

    Nightfox

    ---
    � Synchronet � Digital Distortion: digitaldistortionbbs.com
  • From Digital Man@VERT to Nightfox on Tue Nov 17 17:00:58 2026
    Re: VNC lag on local network after moving
    By: Nightfox to All on Tue Nov 17 2026 10:31 am

    I've considered setting up a different remote desktop solution - I've heard VNC isn't the most optimized, and I suppose a different solution would be okay, as long as I can connect easily (I'd like to be able to connect from a Linux or Windows PC). It just seems odd that it was fine before moving and has the lag now.

    I've been using Chrome Remote Desktop lately (between ChromeOS, Linux, and Windows systems) and happy with it.
    --
    digital man (rob)

    Synchronet/BBS Terminology Definition #19:
    CVS = Concurrent Versioning System
    Norco, CA WX: 60.8�F, 45.0% humidity, 1 mph WSW wind, 0.06 inches rain/24hrs ---
    � Synchronet � Vertrauen � Home of Synchronet � [vert/cvs/bbs].synchro.net
  • From Nightfox@VERT/DIGDIST to Digital Man on Tue Nov 17 17:12:31 2026
    Re: VNC lag on local network after moving
    By: Digital Man to Nightfox on Tue Nov 17 2026 05:00 pm

    I've been using Chrome Remote Desktop lately (between ChromeOS, Linux, and Windows systems) and happy with it.

    I've used that before.. Maybe I'll give that a try. Thanks for reminding me.

    Nightfox

    ---
    � Synchronet � Digital Distortion: digitaldistortionbbs.com
  • From poindexter FORTRAN@VERT/REALITY to Nightfox on Wed Nov 18 08:31:30 2026
    Nightfox wrote to All <=-

    responsive (and I have a gigabit network at home, with my PCs plugged
    in via ethernet). Recently I moved to a new place; my devices are still plugged in via ethernet here, and I've noticed that when I VNC to my
    BBS PC, there's now a lag.

    Are both devices plugged in with an ethernet cable, or into ethernet
    cabling in the walls? I'd check to see if you're getting gig ethernet,
    or if it's auto-negoatiating down to 100 mbps due to a bad cable?

    I've considered setting up a different remote desktop solution - I've heard VNC isn't the most optimized, and I suppose a different solution would be okay, as long as I can connect easily (I'd like to be able to connect from a Linux or Windows PC). It just seems odd that it was
    fine before moving and has the lag now.

    Apparently, there are RDP servers for Linux. Don't know if they're any
    better than VNC or meant for sites where people admin from Windows PCs
    and want to do everything through RDP...

    going through the apartment connecting my fiber internet ONT (in the
    main bedroom closet) to my router in the 2nd bedroom, which I was using
    as an office; my new apartment has ethernet ports wired in each room,
    and I've connected my router and devices that way.

    I would definitely check to see if you're getting gig ethernet through
    the house cabling. I'm assuming you have a patch panel somewhere where
    all of the ports are plugged into the router/switch? If you have access
    to the cables, you might want to check and see if they're Cat5, Cat6,
    or some variation.




    --- MultiMail/Win v0.52
    � Synchronet � .: realitycheckbbs.org :: scientia potentia est :.
  • From poindexter FORTRAN@VERT/REALITY to Nightfox on Wed Nov 18 08:31:30 2026
    Nightfox wrote to nelgin <=-

    Re: Re: VNC lag on local network after moving
    By: nelgin to Nightfox on Tue Nov 17 2026 01:35 pm

    I don't suppose you have a traceroute from your old place to your BBS that you can compare to your new place? It could be taking a less efficient route, but I think you're right about VNC not being the greatest. For me,

    I don't have a traceroute. But that's something I could look into at my current place.

    Wait, is your BBS at home or on a VPS somewhere outside?


    --- MultiMail/Win v0.52
    � Synchronet � .: realitycheckbbs.org :: scientia potentia est :.
  • From Nightfox@VERT/DIGDIST to poindexter FORTRAN on Wed Nov 18 12:17:42 2026
    Re: Re: VNC lag on local network after moving
    By: poindexter FORTRAN to Nightfox on Wed Nov 18 2026 08:31 am

    Wait, is your BBS at home or on a VPS somewhere outside?

    It's at home.

    Nightfox

    ---
    � Synchronet � Digital Distortion: digitaldistortionbbs.com
  • From Nightfox@VERT/DIGDIST to poindexter FORTRAN on Wed Nov 18 12:21:24 2026
    Re: Re: VNC lag on local network after moving
    By: poindexter FORTRAN to Nightfox on Wed Nov 18 2026 08:31 am

    responsive (and I have a gigabit network at home, with my PCs plugged in
    via ethernet). Recently I moved to a new place; my devices are still

    Are both devices plugged in with an ethernet cable, or into ethernet cabling in the walls? I'd check to see if you're getting gig ethernet, or if it's auto-negoatiating down to 100 mbps due to a bad cable?

    I'm not quite sure what you mean.. They're both plugged in with an ethernet cable, into the wall ethernet outlets. More specifically, I have a couple network switches in the room where they computers are in, and both computers are connected to the switches in there. One switch is connected to another switch, which is plugged into the ethernet port in the wall.

    Apparently, there are RDP servers for Linux. Don't know if they're any better than VNC or meant for sites where people admin from Windows PCs and want to do everything through RDP...

    I've used RDP on Linux before. The thing with that is that when you connect, it gives you a fresh desktop. Usually I have a desktop session going with Umonitor for Synchronet and a console window showing the Synchronet log messages. I'd like to connect to the existing desktop session so I can see those.

    I would definitely check to see if you're getting gig ethernet through the house cabling. I'm assuming you have a patch panel somewhere where all of the ports are plugged into the router/switch? If you have access to the cables, you might want to check and see if they're Cat5, Cat6, or some variation.

    I am. I have gigabit internet, and I've run speedtest on my main & BBS computers, and it looks good. The speedtest result on my BBS computer happened to be a bit slower at the time I did the test, but it was more than 100 megabit. The speedtest result on my main PC was closer to gigabit and is what I was seeing at my previous apartment.

    Nightfox

    ---
    � Synchronet � Digital Distortion: digitaldistortionbbs.com
  • From Accession@VERT/PHARCYDE to Nightfox on Wed Nov 18 17:21:26 2026
    Hey Nightfox!

    On Wed, Nov 18 2026 12:21:24 -0800, you wrote:

    computers, and it looks good. The speedtest result on my BBS computer happened to be a bit slower at the time I did the test, but it was more than 100 megabit. The speedtest result on my main PC was closer to gigabit and is what I was seeing at my previous apartment.

    How much "more than 100 megabit"? That's a pretty significant difference in comparison to 1 gigabit. I usually get about 900-950mb/s at speedtest.net with my gigabit plan. If you're getting 100 megabit on one machine and closer to a gigabit on another, then there seems to be an issue somewhere in your apartment.

    Did you mention in a previous message you're using multiple switches? Are you able to consolidate down to one maybe? Wall to modem, modem to router, router to switch, switch to everything else in the apartment?

    Are you running back into the walls from the switch to get internet to other rooms, etc? You may as well spill the beans on how you actually have things configured.

    Regards,
    Accession

    ... I don't suffer from insanity; I enjoy every minute of it.
    --- AmberEdit/linux 0.11.1
    * Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin) (723:1/1)
    � Synchronet � _thePharcyde telnet://bbs.pharcyde.org (Wisconsin)
  • From Nightfox@VERT/DIGDIST to Accession on Wed Nov 18 23:29:49 2026
    How much "more than 100 megabit"? That's a pretty significant difference in comparison to 1 gigabit. I usually get about 900-950mb/s at speedtest.net with my gigabit plan.

    It was about 500-600 metabits at the time.

    Did you mention in a previous message you're using multiple switches? Are you able to consolidate down to one maybe? Wall to modem, modem to router, router to switch, switch to everything else in the apartment?

    So, I ended up consolidating for my BBS PC. I found a longer ethernet cable and pligged it into the first switch; it seems to be faster now as I'd expect. Also, speedtest now shows about 800 megabit download and 950 ipload on my BBS PC.

    So the way I have it set up is, my router is plugged into the fiber ONT, then I have Ethernet cables connecting the router to the wall ports. Then in my computer room, I have an 8-port switch which my main computer and now BBS computer are both connected to. I have a 4-port switch closer to my BBS PC connected to the first switch with a couple other devixes on it (VOIP adapter for my modem, and a network TV tuner).

    Nightfox

    ---
    ■ Synchronet ■ Digital Distortion: digitaldistortionbbs.com
  • From poindexter FORTRAN@VERT/REALITY to Nightfox on Thu Nov 19 07:24:55 2026
    Nightfox wrote to poindexter FORTRAN <=-

    Are both devices plugged in with an ethernet cable, or into ethernet cabling in the walls? I'd check to see if you're getting gig ethernet, or if it's auto-negoatiating down to 100 mbps due to a bad cable?

    I'm not quite sure what you mean.. They're both plugged in with an ethernet cable, into the wall ethernet outlets. More specifically, I
    have a couple network switches in the room where they computers are in, and both computers are connected to the switches in there. One switch
    is connected to another switch, which is plugged into the ethernet port
    in the wall.

    My thought was if there is wall cabling between the two PCs that the
    cabling might not support gigabit ethernet and be forcing the computers
    to communicate at 100 mbps instead of gigabit.




    --- MultiMail/Win v0.52
    � Synchronet � .: realitycheckbbs.org :: scientia potentia est :.
  • From poindexter FORTRAN@VERT/REALITY to Accession on Thu Nov 19 07:24:55 2026
    Accession wrote to Nightfox <=-

    Did you mention in a previous message you're using multiple switches?
    Are you able to consolidate down to one maybe? Wall to modem, modem to router, router to switch, switch to everything else in the apartment?

    Switches are getting cheap nowadays. I upgraded a dumb 8-port switch a
    while ago and found a TP-Link 8 port managed gigabit switch for under
    $40. I wanted something VLAN-aware if/when I start playing with those on
    my network.



    --- MultiMail/Win v0.52
    � Synchronet � .: realitycheckbbs.org :: scientia potentia est :.
  • From Nightfox@VERT/DIGDIST to poindexter FORTRAN on Thu Nov 19 09:27:54 2026
    Re: Re: VNC lag on local network after moving
    By: poindexter FORTRAN to Nightfox on Thu Nov 19 2026 07:24 am

    My thought was if there is wall cabling between the two PCs that the cabling might not support gigabit ethernet and be forcing the computers to communicate at 100 mbps instead of gigabit.

    Ah. It looks like the wall cabling does support gigabit, since I have gigabit internet and I see gigabit (or near-gigabit) speeds using speedtest.net.

    My two computers were just a switch apart from each other; last night I put them on the same switch together, and I think that may have helped a bit.

    Nightfox

    ---
    � Synchronet � Digital Distortion: digitaldistortionbbs.com
  • From Nightfox@VERT/DIGDIST to poindexter FORTRAN on Thu Nov 19 09:30:52 2026
    Re: Re: VNC lag on local network after moving
    By: poindexter FORTRAN to Accession on Thu Nov 19 2026 07:24 am

    Switches are getting cheap nowadays. I upgraded a dumb 8-port switch a while ago and found a TP-Link 8 port managed gigabit switch for under $40. I wanted something VLAN-aware if/when I start playing with those on my network.

    That's true. I'd had a couple of 4-port switches, and when we moved to our new apartment, I decided to buy an 8-port switch for the office/computer room and it was around $40 ish. I decided to keep using the 4-port switch in there for devices a bit further away.

    Nightfox

    ---
    � Synchronet � Digital Distortion: digitaldistortionbbs.com