Fans were held in place by 4 nylon screws per fan. Removed the fans,
did a deep de-dusting of the fans, heat sinks and inside the chassis,
then carefully removed the labels from the fans and put 2 drops
of oil into each fan's axle.
Everything went back together, the fans are quieter, the fan that would
stop working momentarily is working normally, and I didn't break
anything or have screws left over!
| Sysop: | DaiTengu |
|---|---|
| Location: | Appleton, WI |
| Users: | 1,114 |
| Nodes: | 10 (0 / 10) |
| Uptime: | 492508:41:44 |
| Calls: | 14,267 |
| Calls today: | 3 |
| Files: | 186,320 |
| D/L today: |
20,206 files (6,265M bytes) |
| Messages: | 2,518,306 |