1. Forum
  2. Newsgroups
  3. comp.sys.ibm.ps2.hardware

  • Lacuna 76 Boot ROM (XT-IDE)

    From michael dombrowski@[email protected] to comp.sys.ibm.ps2.hardware on Tue Jan 7 19:24:48 2025
    From Newsgroup: comp.sys.ibm.ps2.hardware

    Another Lacuna question... There is at least some PS/2 support for
    XT-IDE (See McIDE). I have a 76i, and it has a 3c529 with a boot ROM
    socket. I've tried the McIDE firmware, as well as the two official
    XT-IDE firmwares labeled "ps2", but I can't seem to get the system to
    use the boot rom. I set a ROM location using the REF disk. Is there
    more magic to this? Is there a known PS/2-compatible boot ROM that I
    can use to test my setup?

    thanks
    mike

    --- Synchronet 3.20a-Linux NewsLink 1.114
  • From Louis Ohland@[email protected] to comp.sys.ibm.ps2.hardware on Tue Jan 7 20:16:37 2025
    From Newsgroup: comp.sys.ibm.ps2.hardware

    I'll watch your efforts from afar.

    michael dombrowski wrote:
    Another Lacuna question... There is at least some PS/2 support for
    XT-IDE (See McIDE). I have a 76i, and it has a 3c529 with a boot ROM
    socket. I've tried the McIDE firmware, as well as the two official
    XT-IDE firmwares labeled "ps2", but I can't seem to get the system to
    use the boot rom. I set a ROM location using the REF disk. Is there
    more magic to this? Is there a known PS/2-compatible boot ROM that I
    can use to test my setup?

    thanks
    mike

    --- Synchronet 3.20a-Linux NewsLink 1.114